Bibliography and Additional References
American Forest & Paper Association and American Wood Council, 2005. National Design Specification for Wood Construction, Washington D.C.
American Society for Testing and Materials, Proceedings of Annual Meetings, 1908. 10th Annual Meeting, June 23-27, Atlantic City N.J., ASTM, West Conshohocken, PA.
American Society for Testing and Materials, 2007. Annual Book of Standards, Vol. 04.10, D189, Stand Test Methods of Static Tests of Lumber in Structural Sizes; D1990, Standard Practice for Establishing Allowable Properties for Visually- Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens; D4761, Standard Test Methods for Mechanical Properties and Wood-Base Structural Materials; D245, Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber; D143, Standard Methods of Testing Small Clear Specimens of Timber; D2555, Standard Test Methods for Establishing Clear Wood Strength Values; D2915, Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber. ASTM, West Conshohocken, PA.
Anthony, R. W., 2004. “Condition Assessment of Timber Using Resistance Drilling and Digital Radioscopy.” APT Bulletin, Vol. 35, No. 4.
Anthony, R. W., 2007. “Basics of Wood Inspection.” APT Bulletin, Vol. 37, No. 2- 3.
Bert, W.G., J. H. Cumming, J. Foreman and H.L. Fry, 1907. “Strength of Bridge and Trestle Timbers.” Proceedings of the Annual Convention of the American International Association of Railway Superintendents of Bridges and Buildings, October 16, 1895, New Orleans, LA, p. 14-63.
Betts, H. S., 1915. “Discussion of the Proposed Forest Service Rules for Grading the Strength of Southern Pine Structural Timbers.” 18th Annual Meeting of the American Society for Testing and Material Proceedings, Vol. 15, Pt. 1.
Betts, H. S. and R. K. Helphenstine, Jr., 1920, revised 1933. “How Lumber is Graded.” U. S. Department of Agriculture Circular No. 64, 48 p.
Booth, L.G., 1964. “The Strength Testing of Timber during the 17th and 18th Centuries.” Journal of the Institute of Wood Science. Vol. 3, No. 13.
Cline, McGarvey and A. L. Heim, 1912. “Tests of Structural Timbers.” U. S. Department of Agriculture, Forest Service Bulletin No. 108, Forest Products Laboratory Series, 123 p.
Cramer, S., Y. Shi, and K. McDonald, 1996. “Fracture Modeling of Lumber Containing Multiple Knots.” Gopu, Vijaya K.A., ed. Proceedings of the International Wood Engineering Conference 1996, October 28-31; New Orleans, LA. Baton Rouge, LA: Louisiana State University: Vol. 4: 288-294. Electronic document, http://www.fpl.fs.fed.us/documnts/pdf1996/crame96b.pdf, accessed July 10, 2008.
Green, D. W. and R. Hernandez, 1998. “Standards for Structural Wood Products and Their Use in the United States.” Journal of Contemporary Wood Engineering, Vol. 9, No.3.
Green, D. W. and J. W. Evans, 2001. Evolution of Standardized Procedures for Adjusting Lumber Properties for Change in Moisture Content. U. S. Department of Agriculture, Forest Products Laboratory General Technical Report FPL-GTR-127. Electronic document, http://www.fpl.fs.fed.us/documnts/fplgtr/fplgtr127.pdf, accessed July 9, 2008.
Hatt, W. K., 1904. “Progress Report on the Strength of Structural Timber.” U. S. Department of Agriculture, Bureau of Forestry Circular No. 32, 28 p.
Hatt, W. K., 1905. “Instructions to Engineers of Timber Tests.” U. S. Department of Agriculture, Bureau of Forestry Circular No. 38.
Ivory, E. P., D. G. White and A. T. Upson, 1923. “Standard Specifications for Yard Lumber.” Circular 296, U. S. Department of Agriculture Forest Service, Forest Products Lab, Madison, WI.
Keenan, F. J. and A. T. Quaile, 1982. “Chapter 4 Evaluation.” In Evaluation, Maintenance and Upgrading of Wood Structures, A Guide and Commentary, Alan Freas, Chairman, American Society of Civil Engineers, New York, p. 159-193.
Lantz, S. F. and R. H. Falk, 1996. “Feasibility of Recycling Timber from Military Industrial Buildings.” In The Use of Recycled Wood and Paper in Building Applications, Proceedings No. 7286 of the Forest Products Society in Cooperation with the National Association of Home Builders Research Center, the American Forest & Paper Association, The Center for Resourceful Building Technology, and Environmental Building New, Madison, WI, September 1996, p. 41-48.
Loferski, J. R., J. D. Dolan and E. Lang, 1996. “Determining Mechanical Properties by Nondestructive Evaluation and Testing Methods in Wood Buildings.” In Standards for Preservation and Rehabilitation, Stephen J. Kelley, Editor, ASTM, West Conshohocken, p. 175-185.
Markwardt, L. J. and T. R. C. Wilson, 1935. “Strength and Related Properties of Wood Grown in the United States.” U. S. Department of Agriculture, Technical Bulletin No. 479, 108 p.
National Institute of Standards and Technology, 1970. Voluntary Product Standard PS20-70 American Softwood Lumber Standard. U.S. Department of Commerce, Gaithersburg, MD.
National Lumber Manufacturers Association, 1944. National Design Specification for Stress-Grade Lumber and Its Fastenings. AIA File No. 19-B-1, Washington D.C., 64 p.
Newlin, J.A. and R.P.S. Johnson, 1923. “Basic Grading Rules and Working Stresses for Structural Timbers.” Circular 295, U. S. Department of Agriculture Forest Service, Forest Products Lab, Madison, WI.
Northeastern Lumber Manufacturers Association, 1998. Standard Grading Rules. Cumberland Center, ME.
Roth, F. and B. E. Fernow, 1895. “Timber: An Elementary Discussion of the Characteristics and Properties of Wood.” U. S. Department of Agriculture, Division of Forestry, Bulletin No. 10, 88 p.
Sganzin, M. I., 1828. An Elementary Course of Civil Engineering (Translated from the French), 2nd edition, Hillard, Gray, Little, and Wilkins, Boston, MA.
Shelley, B. E., 1992. “Evolutionary Standards Development.” In Wood Products for Engineered Structures: Issues Affecting Growth and Acceptance of Engineered Wood Products, Proceedings No. 47329 of the Forest Products Society, November 11-13, 1992, p. 87-92.
Southern Pine Inspection Bureau, 2002. Standard Grading Rules for Southern Pine
Lumber, Pensacola, FL.
Smulski, S. (Ed.), 1997, Engineered Wood Products: A Guide for Specifiers, Designers,
and Users. PFS Research Foundation, Madison, WI.
Talbot, Arthur N., 1909. “Tests of Timber Beams.” University of IllinoisEngineering Experiment Station, Bulletin No. 41, Urbana, IL, 80 p. Electronic document,https://www.ideals.uiuc.edu/bitstream/2142/4144/3/engineeringexperv00000i00041.pdf, accessed July 1, 2008.
Wilson, T. R. C., 1934. “Guide to the Grading of Structural Timbers and the Determination of Working Stresses.” U. S. Department of Agriculture, Miscellaneous Publication No. 185, 27 p.
Western Wood Products Association, 2005. Western Lumber Grading Rules, Portland, OR.
Wood, L. W., 1954. “Structural Values in Old Lumber.” In Southern Lumberman, December 15, 1954.
Woolson, I H., E. H. Brown, W. K. Hatt, A. Kahn, R.P. Miller, J. A. Newlin, and J. R. Worcester, 1926. “Recommended Building Code Requirements for Working Stresses in Building Materials.” U.S. Department of Commerce, Bureau of Standards, Elimination of Waste Series, 53 p.
Yeomans, D. T., 1999. “The Problems of Assessing Historic Timber Strength Using Modern Design Codes.” In The Use and Need for Preservation Standards in Architectural Conservation, Lauren B. Sickels-Taves, Editor, ASTM, West Conshohocken, PA, p. 119-127.